The weekend of March 18 & 19 I will be returning to the Sam Beauford Woodworking Institute in Adrian, Michigan to teach a “SketchUp for Woodworkers” class. If you’ve been wanting to learn how to make 3D models of your … Continue reading →
This time next week I’ll be heading to Adrian, Michigan to teach a weekend SketchUp class at the Sam Beauford Woodworking Institute. As I write this there are a few spots still available, so sign up now! CLICK HERE TO … Continue reading →
SketchUp Class November 5-6, 2022 at Sam Beauford Woodworking Institute, Adrian, Michigan Like everyone else I’ve made some adjustments to what I do in the last few years. One of the things I’ve missed is teaching SketchUp, but that is … Continue reading →
This August 10 & 11 I will be returning to the Marc Adams School of Woodworking to teach a class called “Supercharge SketchUp”. Unlike most of my SketchUp classes this is intended for folks who already have some experience in … Continue reading →
On October 13-14, 2018 I will be conducting a two-day SketchUp class, in Pittsburgh, PA thanks to the Western Pennsylvania Woodworkers club. I will also be giving a presentation of my work to the club (guests are welcome) on Friday … Continue reading →
Way back when I was in design school (board drafting with T-square and pencil) one of my teachers mentioned that people who work with sheet metal duct work know more about practical geometry than anyone in the world. I was … Continue reading →
It’s been a busy spring. I just completed a two-day SketchUp class. Earlier in April I taught a week-long woodworking class at MASW, and attended half of my local Society of American Period Furniture Makers chapter meeting. As often happens, … Continue reading →
If learning how to make 3D models in SketchUp is on your “to-do” list, and you want to shorten the learning curve, there are still a few slots available in my upcoming class, April 26-27 in the Cincinnati, Ohio area. … Continue reading →
I will be hosting a two-day SketchUp class on Thursday and Friday, April 26-26, 2018, 9am to 5pm in the Cincinnati area. This is your opportunity to learn 3D modeling from an expert SketchUp trainer in a small class, held … Continue reading →
Several people have contacted me lately, wondering when I will host a SketchUp class here in the Cincinnati area. I’m thinking this March or April will work, if I can round up enough students. If you’re thinking that now is … Continue reading →
There are still seats available in my upcoming SketchUp class at the Philadelphia Furniture Workshop, November 11 & 12, 2017. This is the last live class I have scheduled for this year, and a rare appearance for me in the … Continue reading →
I’m delighted to announce a SketchUp Class to be held the weekend of November 11-12, 2017 at the Philadelphia Furniture Workshop in Philadelphia, PA. You can get detailed information and register for this class at the PFW website. While this … Continue reading →
About two months ago I floated the idea of offering online SketchUp classes and about one month ago I held some live practice sessions. It’s a simple idea; I can connect with students online, they can see my screen, I … Continue reading →
Space Available MASW July 22-23 SketchUp Class There are still a few seats available in the two-day SketchUp class I will be teaching on the weekend of July 22-23, 2017 at the Marc Adams School of Woodworking in Franklin, Indiana. … Continue reading →
UPDATE-Wednesday June 21: Last night’s session went well. There are still a few spots available for Saturday morning. Contact me by e-mail to reserve your spot. I’m getting closer to offering a series of live online classes for using SketchUp … Continue reading →
One of my favorite weekends of the year is teaching SketchUp at the Marc Adams School of Woodworking in Indiana. There are still a few spots available in this years class on the weekend of July 22 & 23. Complete … Continue reading →
Teaching yourself how to use computer software is possible, (that’s how I learned to use SketchUp) but the drawback is you suffer for a while with an ignorant teacher (I know I did). The problem is you don’t know what … Continue reading →
In the almost 10 years that I’ve been teaching people how to 3D model with SketchUp, I’ve learned a lot about the many ways different people learn. Each of us is a little different in the way our brains absorb … Continue reading →
It’s now official! The class scheduled for May 6 & 7 in Pittsburgh, PA is set to go. There are still a limited number of spaces available, so if you’re ready to learn how to make 3D models with SketchUp, … Continue reading →
SCROLL DOWN FOR LIST OF AVAILABLE CLASSES Who needs to learn SketchUp? In my way of thinking everybody, or at least everybody who is involved with making things. I was trained to produce detailed drawings on a drafting board, then … Continue reading →
Thanks to the organizing efforts of one of my readers I will be teaching a two-day SketchUp Woodworking class this May 6-7, 2017 in the Pittsburgh, PA area. This class will focus on woodworking, but the 3D modeling techniques you … Continue reading →
NOTE: This class is history! CLICK HERE to help me plan a class for Spring 2018 I will be teaching a two-day SketchUp class on March 18 & 19, 2017, at the Golden Lamb Inn in Lebanon, Ohio. This two-day … Continue reading →
CLASS IS SCHEDULED FOR MARCH 18 & 19, 2017 CLICK HERE FOR DETAILS AND SIGN UP TODAY I plan on hosting a SketchUp class this spring in the Cincinnati area. Where and when will depend on you! I’m leaning towards … Continue reading →
I will be teaching a two-day SketchUp class on June 2 & 3, 2016, at the Golden Lamb Inn in Lebanon, Ohio. This two-day class (Thursday and Friday) will cover how to use SketchUp to design, plan and problem solve … Continue reading →
Several readers have been in touch wanting to know when I will be having another SketchUp class in Cincinnati. If you’re in the area (or willing to travel) you can help me decide when to hold a class and how … Continue reading →
Next weekend I will be in Birmingham, Alabama as a guest of the Alabama Woodworkers Guild. On Friday evening, April 8, 2016 from 6-9pm I will be conducting a Woodworking With SketchUp workshop. This special event is open to the … Continue reading →
One of the most flattering things that can happen to an author is an inquiry asking “Can I use your book as a resource for my class?” It makes me feel a little proud and it also makes me want … Continue reading →
The weekend of January 30-31 I will be conducting a two-day SketchUp class in Denver, Colorado at the Rockler Woodworking & Hardware store. COMPLETE DETAILS ABOUT THE CLASS ARE HERE If you would like to participate, you are not too … Continue reading →
A few people have asked about the SketchUp class scheduled for January 30-31 at the Rockler Woodworking & Hardware Store in Denver, Colorado. This class will be held as scheduled. If you’d like to join me for this class, there … Continue reading →
SketchUp is a wonderful tool for a multitude of purposes. When you harness the power of 3-D modeling you can accurately plan, engineer, design and problem solve. From the same model that gives you all the technical information you need … Continue reading →
UPDATE – JANUARY 12, 2016 – CLASS IS DEFINITELY ON! A FEW SEATS ARE STILL AVAILABLE! I will be teaching a two-day SketchUp class on January 30 & 31, 2016, and the Rockler Woodworking & Hardware store in Denver, Colorado. … Continue reading →
It’s just starting to look like fall here in Cincinnati, but I’m working on my teaching schedule for 2016. I’ll be announcing some classes soon, but in the meantime you can help me out in a couple of ways. Here … Continue reading →
In the comments to a recent post about an upcoming SketchUp class in Cincinnati the suggestion was made that I hold a class in “Denver or thereabouts”. My response was that it only takes enough people to sign up to … Continue reading →
This post is from 2015 – this class is over! CLICK HERE FOR INFO ON UPCOMING CLASSES SketchUp is a versatile and powerful 3D modeling tool, and if designing, planning or making things is part of what you do, you … Continue reading →
I will be teaching an introduction to SketchUp Class on Saturday, October 10, and Sunday, October 11, 2015 at The Manufactory, here in Cincinnati. The class will follow the “Building Blocks of SketchUp” format, where you will learn how to … Continue reading →
This post is out of date! Click Here for up-to-date information about Upcoming SketchUp Classes. I will be teaching two, two-day SketchUp classes in the next few months, and there are just a few seats still available in each class. … Continue reading →
In a few weeks I’ll be traveling to Maine to teach a week long SketchUp class for woodworkers at the Center for Furniture Craftsmanship. The class will be held September 8-12, 2014. There are still a few spots open, so … Continue reading →
Over the past several months I’ve made fuzzy mention about SketchUp classes for 2014, and I’ve been receiving requests for a schedule. Before I go out on a limb, I’d like to gauge the interest of my audience about class … Continue reading →
My teaching schedule for 2014 is beginning to be established, and I’m happy to announce that next September 8-12 I will be teaching a week-long SketchUp class at the Center for Furniture Craftsmanship in Rockport, Maine. Registration opens December 16 … Continue reading →
Taking a week-long class in SketchUp is the best way I know to really make progress in using this program to design your woodworking projects. If you’re ready to take that step, there are still a few spots available in … Continue reading →
