Way back when I was in design school (board drafting with T-square and pencil) one of my teachers mentioned that people who work with sheet metal duct work know more about practical geometry than anyone in the world. I was … Continue reading
Tag Archives: Bob Lang
Note: This is another older post (from about 5 years ago) that sank to the bottom of this site’s feed. I’ve brought it back to the top because it’s a good (and easy and fool-resistant) way to make these joints. … Continue reading
Note: This post originally appeared a few years ago. One of the problems with online content is that good stuff drifts to the bottom. This is a good tip, so I’ve pushed it back to the top of the feed. … Continue reading
Note: This post originally appeared about 5 years ago. I think it’s pretty good so I moved it back up in the feed. Tearing an ugly hunk out of a nice piece of solid wood can be a heartbreaker. You … Continue reading
When I first started using (and teaching and writing about) 3D modeling with SketchUp, the differences between the free and paid versions of the software were simple to understand (this 2015 post goes into detail about the differences between “SketchUp … Continue reading
It’s been a busy spring. I just completed a two-day SketchUp class. Earlier in April I taught a week-long woodworking class at MASW, and attended half of my local Society of American Period Furniture Makers chapter meeting. As often happens, … Continue reading
If learning how to make 3D models in SketchUp is on your “to-do” list, and you want to shorten the learning curve, there are still a few slots available in my upcoming class, April 26-27 in the Cincinnati, Ohio area. … Continue reading
There is a lot to like about classes at the Marc Adams School of Woodworking. The first time you visit you’re impressed by the size and scope of the facility. As a class goes on you realize how good the … Continue reading
I will be hosting a two-day SketchUp class on Thursday and Friday, April 26-26, 2018, 9am to 5pm in the Cincinnati area. This is your opportunity to learn 3D modeling from an expert SketchUp trainer in a small class, held … Continue reading
Several people have contacted me lately, wondering when I will host a SketchUp class here in the Cincinnati area. I’m thinking this March or April will work, if I can round up enough students. If you’re thinking that now is … Continue reading
I don’t mind answering questions from readers, because good questions often become useful blog posts. In this instance, the question wasn’t quite clear so I’m showing two solutions. One way to solve problems in SketchUp is to consider how it … Continue reading
Sometimes the best things appear in the most unexpected places. You wouldn’t expect to find a woodworking school smack dab in the middle of central Indiana, but that’s the location of the Marc Adams School of Woodworking. MASW has been … Continue reading
I am pleased to announce that I have agreed to edit the 2018 edition of “American Period Furniture” the annual journal of the Society of American Period Furniture Makers. This will be a refreshing change for me as the focus … Continue reading
I don’t teach woodworking classes very often, although I usually say yes when someone asks me to. The picture at left is from a series of blog posts written by one of the guys in my most recent class at … Continue reading
There are still seats available in my upcoming SketchUp class at the Philadelphia Furniture Workshop, November 11 & 12, 2017. This is the last live class I have scheduled for this year, and a rare appearance for me in the … Continue reading
Last week I was at the Marc Adams School of Woodworking teaching a dozen woodworkers how to make a chair. Usually when I teach I write about the class ahead of time, but this was different from the norm. I … Continue reading
One of the ways to improve your woodworking skills has more to do with your mindset than your skill set. If you aren’t willing to do things you’ve never done before you won’t improve. That’s a simple concept, but it … Continue reading
I’ve been making stuff from wood for more than 40 years and I do better work now than I used to. (If you’re curious about my woodworking, you can find photos going way back at this link.) I’m not one … Continue reading
I was one of those kids who continually asked “why?” and I’ve never outgrown that. My mother taught me how to look things up and my dad, a card-carrying chemical engineer, taught me to weigh the results of anything I … Continue reading
Before Gustav Stickley became “The Craftsman” he manufactured furniture in upstate New York. After twenty-some years in the business, he took a trip to Europe, where the Arts & Crafts movement was popular in England and L’art Nouveau was a … Continue reading
The dado joint, a channel cut in one piece of wood that holds another piece of wood, is one of the bread and butter joints in woodworking. It isn’t as charming as a dovetail joint, or as manly as a … Continue reading
Early in my career I was told by the man who hired me “we’ll teach you to think like a cabinetmaker”. Apparently that worked, and since I’ve transitioned from full time woodworking to writing about woodworking, I feel compelled to … Continue reading
I’m delighted to announce a SketchUp Class to be held the weekend of November 11-12, 2017 at the Philadelphia Furniture Workshop in Philadelphia, PA. You can get detailed information and register for this class at the PFW website. While this … Continue reading
I will be teaching a class in building this cabinet on August 26 & 27, 2017 at the Marc Adams School of Woodworking. Click Here for details. Along with an appreciation for good design, I’m also fond of the stories … Continue reading
Last night I spent a pleasant hour chatting with Lance Granum and Dave Damsen of the “This Old Workshop” Podcast. We talked about how SketchUp makes woodworking better (and why I’m convinced every woodworker should learn it), the 21st Century … Continue reading
It is like hoisting a danger signal to speak out loud to Mr. Stickley of ornament, yet all people do not know this. “It is very grand,” said one visitor, “but have you no ornament, carving or draperies in … Continue reading
About two months ago I floated the idea of offering online SketchUp classes and about one month ago I held some live practice sessions. It’s a simple idea; I can connect with students online, they can see my screen, I … Continue reading
Space Available MASW July 22-23 SketchUp Class There are still a few seats available in the two-day SketchUp class I will be teaching on the weekend of July 22-23, 2017 at the Marc Adams School of Woodworking in Franklin, Indiana. … Continue reading
Special Price on two books “The Complete Kitchen Cabinetmaker” and “SketchUp for Kitchen Design” scroll down to purchase. If you’re considering remodeling your kitchen, you’re not alone. It’s a great way to make your home more enjoyable, and a new … Continue reading
UPDATE-Wednesday June 21: Last night’s session went well. There are still a few spots available for Saturday morning. Contact me by e-mail to reserve your spot. I’m getting closer to offering a series of live online classes for using SketchUp … Continue reading
The good folks at SketchUp recently tweaked the features of the 3D Warehouse and it is now possible to “borrow” materials or components from a warehouse model without downloading the entire model. In this example I have a model of a … Continue reading
Furniture from the American Arts & Crafts period is often misunderstood and misinterpreted. Many woodworkers assume that the deliberate lack of ornament means it is easy to build. One often overlooked feature is the visual effect of parallel surfaces that … Continue reading
In the almost 10 years that I’ve been teaching people how to 3D model with SketchUp, I’ve learned a lot about the many ways different people learn. Each of us is a little different in the way our brains absorb … Continue reading
The average woodworker doesn’t always use the best looking method to join two pieces of wood – he or she is happy just to get the face frame stuck to the cabinet side. That’s why these folks are “average”. The … Continue reading
I’m a stickler for getting the history of Craftsman furniture correct. Too much has been written about the people, dates, responsibilities and relationships of the original makers and designers that doesn’t hold up to scrutiny. And a lot of these … Continue reading
One way to judge the merit of an idea is to see how long the results of that idea stay around. A long time ago I thought it would be a good idea if somebody published a book of measured … Continue reading
It’s now official! The class scheduled for May 6 & 7 in Pittsburgh, PA is set to go. There are still a limited number of spaces available, so if you’re ready to learn how to make 3D models with SketchUp, … Continue reading
Last fall I spent a week at the Marc Adams School of Woodworking near Indianapolis, Indiana, leading a group of woodworkers in the construction of reproductions of the iconic Gustav Stickley/Harvey Ellis No. 700 Bookcase. Marc Adams’ classes are always … Continue reading
How far do you go with details in a SketchUp model? That’s a common question and the answer depends on what you’re making the model for versus how much time it will take to add the details. In my work, … Continue reading
SCROLL DOWN FOR LIST OF AVAILABLE CLASSES Who needs to learn SketchUp? In my way of thinking everybody, or at least everybody who is involved with making things. I was trained to produce detailed drawings on a drafting board, then … Continue reading