photo courtesy John Mark Power
A completed piece of furniture provides a feeling of satisfaction and accomplishment that people who don’t make furniture miss out on. I suppose it’s like most things in life that take dedicated effort and practice; those who have been there know what it’s like and get to enjoy the payoff. I don’t get to build as much as I would like to these days, but guys like John Mark Power enable me to get a vicarious thrill. He sent me an e-mail recently, along with a link to a story on his blog about a recent build.
I always wonder when I send off a copy of one of my books or a set of plans what the end result will be. My hope is that I help my readers get a little closer to the top of the furniture making mountain. When I wrote my first book, “Shop Drawings for Craftsman Furniture”, published in 2001, I tried to provide something that I would have found useful when I was starting out in the 1970s. Every so often I hear from a reader with a question or photos of a completed project. The music cabinet at the left isn’t in my book, but it was featured in an article in Popular Woodworking Magazine (my day job for the last 10 years). That article is one of the projects in “Classic Arts & Crafts Furniture: 14 Timeless Designs.”
photo courtesy John Mark Power
When I built my version, I went over the top with the joinery on the doors. There is a picture of the end result on the readwatchdo.com Home page and a blog post about the process on the Pop Wood editor’s blog.The mitered mullions/muntins appeared on some early pieces of Gus Stickley furniture, and it’s a cool detail, but takes some time.
John Mark is a lot more sensible than I am, so he details a different approach to making the doors. He’s also more historically accurate; I’ve never seen that particular detail on this particular piece. If you’re contemplating building this piece, it is worth your while to visit his blog, where he details how he got from a stack of wood to a nice piece of furniture.
photo courtesy of John Mark Power
In addition to details about the door, there is a boatload of good information about the entire project, including adding leaded glass to the doors and finishing.
My thanks to John Mark for sharing his effort. It benefits the entire craft when people who know their stuff pass along their methods and approach.
Pingback: “Classic Arts & Crafts Furniture: 14 Timeless Designs” | ReadWatchDo.com
Bob,
I am currently building a Stickley #700 A&C Bookcase from your plans and it is coming out great. I do have a question on the dimensions of the face frame stiles as relates to the door. The stiles, according to the plan, are 7/8ths of an inch thick and the door is made from 3/4 stock. My question is the placement of the hinges. Is there going to be a problem with the action of the hinges as the part on the stile will be set back from the face? Am I missing something?
Any insight will be appreciated.
Dan C.
Hi Dan,
Set the hinges so that the barrel of the hinge is right at the outer edge of the stile. It will be slightly proud of the edge of the door, but that sets the door back from the face of the stile. Because of the width of the door, you’ll likely need to put a slight back bevel on the lock side of the door stile.
Bob
Hey Bob,
Thanks for the speedy reply. That was my thought also but wanted to double check. The carcass is all finished and I’m starting on the door. It should be ready for pictures in about two weeks.
Thanks again for your assistance and the great plans.
Dan C.
Pingback: stickley furniture plans august 2017 – My cool blog